Freight
Drop Deck: 48′ x 102″
Typical Specifications
- Two 22,500 lb. axles on 10′ spread
- 16 1/2″ x 7″ ABS air brakes
- Outboard 10 bolt hub and drum
- 255/70R 22.5 16 ply tires
- 22.5 hub piloted wheels
- Air ride suspension
- Park brake both axles
- Cab controlled rear axle air dump valve
- Two 2-speed landing legs
- Spare tire mount
- Anti-sail mud flaps (front and rear axle)
- DOT bumper
- 1 1/8″ S/L apitong flooring
- Stake pockets on 24″ centers
- Pipe spacers between stake pockets
- 5/16″ x 2″ rub rail
- Crossmembers on 16″ centers
- Sealed wiring harness
- Sealed beam lighting
- Acid washed with rust inhibitor
- Prime coated completely
- Two coats polyurethane
Suggested Options
14' x 18'' Aluminum Ramps
Heavy duty aluminum rear ramps have their own storage compartment. These ramps are available in 6,000#, 8,000# and 12,000# axle capacities. Different lengths available as well.9' Floor Recessed Ramps
Nothing can be easier than using these front ramps. When not in use they form part of the lower deck but when they are needed the spring assists allows them to be lifted into place with a single hand.3' x 23'' Rear Deck Extenders
Rear deck extenders give you that additional carrying space when you need it. Fully extended (tail lamps slide out with extender) to 3′ the pair has a 6000# capacity. Adjustment positions are on 1′ centers.3' x 23'' Front Extenders
Front or rear deck extenders (tail lamps slide out with rear)allow extra carrying space for long wheelbase vehicles. Fully extended to 3′ x 23″ the pair has a 6000# capacity. Adjustment positions are on 1′ centers.Ball Stands and Tread Plate
Center track with ball stands and tread plate.Hot Shot Drop Deck: 48′ x 8′ x 40″
Typical Specifications
- Two 22,500 lb. axles on 10′ spread
- 16 1/2″ x 7″ ABS air brakes
- Outboard 10 bolt hub and drum
- 255/70R 22.5 16 ply tires
- 22.5 hub piloted wheels
- Cab controlled rear axle air dump valve
- Air ride suspension
- 18″ kingpin setting
- 8′ upper deck
- 40′ lower deck with 40″ deck height
- Two 2-speed landing legs
- Spare tire mount
- 1 1/2″ pressure treated flooring
- 5/16″ x 2″ rub rail
- Anti-sail mud flaps (front and rear axle)
- DOT bumper
- Stake pockets on 24″ centers
- Pipe spacers between stake pockets
- 5/16″ x 2″ rub rail
- Crossmembers on 16″ centers
- Sealed wiring harness
- Sealed beam lighting
- Acid washed with rust inhibitor
- Prime coated completely
- Two coats polyurethane
Suggested Options
- Front and Rear Extenders
- Front Floor Recessed Ramps
- Aluminum Rear Ramps With Slide-in Compartments